PF-60 HD PRE-FILTER VESSEL

PF-60 HD PRE-FILTER VESSEL

Pre-filter vessel to trap and filter contaminants from a fuel tank storage system.

PF-60 HD PRE-FILTER VESSEL

AXI Pre-Filter Systems facilitate the tank cleaning process by trapping extraordinary amounts of sludge, rust, scale, and other contaminants upstream.  The PF-60HD carbon steel bag vessel is designed to offer a high-quality and economical solution to applications that do not require stainless steel construction. The V-ring tubesheet design provides a positive snap-fit to ensure against by-pass.

High-Capacity Fuel Pre-Filtering

The AXI Pre-Filter System is designed to provide large-capacity, heavy duty pre-filtering when used as a stand alone pre-filter unit. AXI Pre-Filter Systems facilitate the tank cleaning process by trapping extraordinary amounts of sludge, rust, scale, and other contaminants upstream. Utilizing an AXI Pre-Filter assembly provides a substantial reduction in the cost of consumables during a tank cleaning operation because pre-filter bags are inexpensive compared to fine filtration methods. AXI Pre-Filter assemblies can include a hose-kit. Optional pre-filter assemblies include ball valves for the inflow and outflow lines, a drain valve, and a vacuum gauge to indicate the need to change the filter bag.  The PF-60HD carbon steel bag vessel is designed to offer a high-quality and economical solution to applications that do not require stainless steel construction. The V-ring tubesheet design provides a positive snap-fit to ensure against by-pass.

Managing Multiple Systems or Large Facilities?

Check out AXI’s line of Fuel Transfer Systems, Day Tanks, and Master Control Panels that tie your systems all together — or click on the button to have one of our Engineers assist you in building a system for your specific needs.

  • Flow Rate

    1200 GPM

  • Pressure Rating

    150 psi

  • Filtration

    1-250μ Particulate

  • Inlet/Outlet

    6″ Flanged

  • Material

    Carbon Steel Housing

  • Finish

    Epoxy Coated Inside and Outside

  • Filter Elements

    Requires 6 – 6″ x 18″ elements

  • Caution

    Not for use with fluids that have a flash point below 100°F

PF-60 HD Includes:
  • Carbon steel construction with epoxy-coating
  • RF Flanged “inline” inlet/outlet connections
  • Snap-fir V-ring bag seal design
  • Stainless steel perforated support baskets
  • Permanent compression / hold-down plate
  • Heavy-duty welded angle mounting/support legs
  • Single o-ring seal (Buna-N standard)
  • Easy-access eye-nut/swing-bolt closure with bearing assisted hand-wheel davit

For the PF-60 HD, is a independent stand alone pre-filter.

  • Filter Bag Micron Sizes
DESCRIPTION

High-Capacity Fuel Pre-Filtering

The AXI Pre-Filter System is designed to provide large-capacity, heavy duty pre-filtering when used as a stand alone pre-filter unit. AXI Pre-Filter Systems facilitate the tank cleaning process by trapping extraordinary amounts of sludge, rust, scale, and other contaminants upstream. Utilizing an AXI Pre-Filter assembly provides a substantial reduction in the cost of consumables during a tank cleaning operation because pre-filter bags are inexpensive compared to fine filtration methods. AXI Pre-Filter assemblies can include a hose-kit. Optional pre-filter assemblies include ball valves for the inflow and outflow lines, a drain valve, and a vacuum gauge to indicate the need to change the filter bag.  The PF-60HD carbon steel bag vessel is designed to offer a high-quality and economical solution to applications that do not require stainless steel construction. The V-ring tubesheet design provides a positive snap-fit to ensure against by-pass.

Managing Multiple Systems or Large Facilities?

Check out AXI’s line of Fuel Transfer Systems, Day Tanks, and Master Control Panels that tie your systems all together — or click on the button to have one of our Engineers assist you in building a system for your specific needs.

SPECIFICATIONS
  • Flow Rate

    1200 GPM

  • Pressure Rating

    150 psi

  • Filtration

    1-250μ Particulate

  • Inlet/Outlet

    6″ Flanged

  • Material

    Carbon Steel Housing

  • Finish

    Epoxy Coated Inside and Outside

  • Filter Elements

    Requires 6 – 6″ x 18″ elements

  • Caution

    Not for use with fluids that have a flash point below 100°F

SYSTEM FEATURES
PF-60 HD Includes:
  • Carbon steel construction with epoxy-coating
  • RF Flanged “inline” inlet/outlet connections
  • Snap-fir V-ring bag seal design
  • Stainless steel perforated support baskets
  • Permanent compression / hold-down plate
  • Heavy-duty welded angle mounting/support legs
  • Single o-ring seal (Buna-N standard)
  • Easy-access eye-nut/swing-bolt closure with bearing assisted hand-wheel davit
SYSTEM OPTIONS

For the PF-60 HD, is a independent stand alone pre-filter.

  • Filter Bag Micron Sizes
Related Products