STS 7000 P-35 Fuel Maintenance System
STS 7000 P-35 Fuel Maintenance System
The STS 7000 P-35 is a passive fuel maintenance system that removes water, sludge, and other contaminants from fuel storage tanks through routine passive filtration. The system’s NEMA 4 rated enclosure allows for both outdoor and indoor installations by protecting the system from windblown dust and rain, hose directed water, and ice formations. With a 35 GPM flow rate, the STS 7000 P-35 can polish up to 16,800 gallons (63,595 liters) of fuel in a runtime of 8-hours. Robust system upgrades are available for this system and can be found under the “System Upgrades” tab below.
- Product Specifications
- System Upgrades
- Technical Documents
- Troubleshooting
|
Nominal Flow Rate |
30 GPM/1,800 GPH (113.6 LPM/6,813.7 LPH) |
|
Primary Filter |
1, 5, 10, or 25μ Coalescing Filter Element |
|
Secondary Filters |
1, 3, 10, or 25μ Particulate or 3, 10μ Water Block |
|
Fuel Conditioner |
LG-X 4000 Inline Magnetic Conditioner |
|
System Controller |
7000 Series Smart Filtration Controller with
Safety and Alarm Features |
|
Power |
120V/60Hz/20A/1Ph |
|
Plumbing |
Black Iron |
|
Ports |
1.5” NPT In, 1.5” NPT Out |
|
Enclosure |
NEMA 4 Rated Powder Coated or NEMA 4X Rated Stainless Steel |
|
Dimensions |
≈ 56” x 72” x 17” (142 x 183 x 43 cm) (H x W x D)
|
|
Weight |
≈ 404 lbs (183.3 kg) |
|
Auto Water Drain (AWD) |
Automatically drain water separator of collected water for decreased maintenance frequency |
|
Manual Additive Injection |
Manually draw additive into the polisher to treat fuel supply |
|
Auto Additive Injection |
Treat fuel supply with an automated and precise injection of fuel additive |
|
Multi-Tank |
Service multiple tanks with a single STS system |
|
Enclosure Heater |
Prevent the build up of condensation inside the system enclosure due to temperature changes |
Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).
|
Nominal Flow Rate |
30 GPM/1,800 GPH (113.6 LPM/6,813.7 LPH) |
|
Primary Filter |
1, 5, 10, or 25μ Coalescing Filter Element |
|
Secondary Filters |
1, 3, 10, or 25μ Particulate or 3, 10μ Water Block |
|
Fuel Conditioner |
LG-X 4000 Inline Magnetic Conditioner |
|
System Controller |
7000 Series Smart Filtration Controller with
Safety and Alarm Features |
|
Power |
120V/60Hz/20A/1Ph |
|
Plumbing |
Black Iron |
|
Ports |
1.5” NPT In, 1.5” NPT Out |
|
Enclosure |
NEMA 4 Rated Powder Coated or NEMA 4X Rated Stainless Steel |
|
Dimensions |
≈ 56” x 72” x 17” (142 x 183 x 43 cm) (H x W x D)
|
|
Weight |
≈ 404 lbs (183.3 kg) |
|
Auto Water Drain (AWD) |
Automatically drain water separator of collected water for decreased maintenance frequency |
|
Manual Additive Injection |
Manually draw additive into the polisher to treat fuel supply |
|
Auto Additive Injection |
Treat fuel supply with an automated and precise injection of fuel additive |
|
Multi-Tank |
Service multiple tanks with a single STS system |
|
Enclosure Heater |
Prevent the build up of condensation inside the system enclosure due to temperature changes |
Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).