AXI's offices will be closed Monday, Sept. 2nd in observance of Labor Day. We will resume normal business hours Tuesday, Sept. 3rd.
MTC HC-150
Mobile Fuel Polishing System
- Removes heavy and fine contaminants such as sludge, water, and particulates from fuel storage tanks
- Portable system design for easy transportation
- Adjustable fuel polishing flow rate with included variable frequency device (10 - 150 GPM)
- Multi-Stage filtration process with fine filter bypass
- Prevents unnecessary mess, catching potential drips or spills produced during routine filter changes with the skid's drip tray
Product Details
Product Specifications
Technical Documents
Troubleshooting
The MTC HC-150 is a high capacity mobile fuel polishing system that removes water, sludge, sediment, and other contaminants that accumulate in fuel storage tanks. The system’s redundant design allows users to isolate filter elements for servicing without interrupting the fuel polishing operation. The MTC HC-150 also features a multi-phase fuel polishing process that allows users to remove water and larger particulate before utilizing fine filtration elements. With an adjustable flow rate range of 10 to 150 GPM, the MTC HC-150 can polish up to 72,000 gallons (272,550 liters) of fuel in a runtime of 8-hours.
System Features:
Multi-Stage Filtration
Remediate fuel to desired cleanliness level with a multi-stage filtration process
Fine Filter Bypass
Spare fine filters during heavy contaminant removal
Dual-Branch Design
Isolate and service a given side of each skid while continuing to polish the fuel via the other side
Adjustable Flow Rates
Adjust fuel polishing flow rates between 10 - 150 GPM
Portable System Design
Easily transport system from tank to tank with the system's skid-based construction
Drip Tray
Capture potential drips or spills produced during routine filter changes
Nominal Flow Rate
10 - 150 GPM (37.9 - 567.8 LPM)
Primary Filters
Bag Filter Vessel, Liner Basket for use with 1 - 800μ Bag Filters
Water Separators
FP-90 Mechanical Water Separator
Secondary Filters
Cartridge Filter Vessel, 2 - 30μ Particulate, 10-30μ Water Block, or 3-10μ Micro-glass Filters
Fuel Conditioners
LG-X 4000 Inline Magnetic Conditioner
Pump
10 HP Sliding Vane Pump
System Controller
SFC80 Smart Filtration Controller with Safety and Alarm Features
Power
480V/60Hz/3Ph
Plumbing
Black Iron
Ports
3" Cam & Groove In, 2.5" Cam & Groove Out
Dimensions (Pre-Filter Skid)
≈ 59” x 36” x 45” (150 x 91 x 114 cm) (H x W x D)
Dimensions (Pump Skid)
≈ 59” x 36” x 45” (150 x 91 x 114 cm) (H x W x D)
Weight (Pre-Filter Skid)
≈ 850 lbs (385.5 kg)
Weight (Pump Skid)
≈ 900 lbs (408.2 kg)
Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).
The MTC HC-150 is a high capacity mobile fuel polishing system that removes water, sludge, sediment, and other contaminants that accumulate in fuel storage tanks. The system’s redundant design allows users to isolate filter elements for servicing without interrupting the fuel polishing operation. The MTC HC-150 also features a multi-phase fuel polishing process that allows users to remove water and larger particulate before utilizing fine filtration elements. With an adjustable flow rate range of 10 to 150 GPM, the MTC HC-150 can polish up to 72,000 gallons (272,550 liters) of fuel in a runtime of 8-hours.
System Features:
Multi-Stage Filtration
Remediate fuel to desired cleanliness level with a multi-stage filtration process
Fine Filter Bypass
Spare fine filters during heavy contaminant removal
Dual-Branch Design
Isolate and service a given side of each skid while continuing to polish the fuel via the other side
Adjustable Flow Rates
Adjust fuel polishing flow rates between 10 - 150 GPM
Portable System Design
Easily transport system from tank to tank with the system's skid-based construction
Drip Tray
Capture potential drips or spills produced during routine filter changes
Nominal Flow Rate
10 - 150 GPM (37.9 - 567.8 LPM)
Primary Filters
Bag Filter Vessel, Liner Basket for use with 1 - 800μ Bag Filters
Water Separators
FP-90 Mechanical Water Separator
Secondary Filters
Cartridge Filter Vessel, 2 - 30μ Particulate, 10-30μ Water Block, or 3-10μ Micro-glass Filters
Fuel Conditioners
LG-X 4000 Inline Magnetic Conditioner
Pump
10 HP Sliding Vane Pump
System Controller
SFC80 Smart Filtration Controller with Safety and Alarm Features
Power
480V/60Hz/3Ph
Plumbing
Black Iron
Ports
3" Cam & Groove In, 2.5" Cam & Groove Out
Dimensions (Pre-Filter Skid)
≈ 59” x 36” x 45” (150 x 91 x 114 cm) (H x W x D)
Dimensions (Pump Skid)
≈ 59” x 36” x 45” (150 x 91 x 114 cm) (H x W x D)
Weight (Pre-Filter Skid)
≈ 850 lbs (385.5 kg)
Weight (Pump Skid)
≈ 900 lbs (408.2 kg)
Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).
MTC HC-150 Price Request
Enter your name, email, and location and the proper AXI representative will reach out shortly.
Engineering Services
Products
Resource Center
Information
All company names, logos, and brands are property of their respective owners. Use of these names, logos, and brands does not imply endorsement.
Copyright © 2024 AXI International | All Rights Reserved.
Copyright © 2024 AXI International | All Rights Reserved.