MTC HC-50
Mobile Fuel Polishing System
- Removes heavy and fine contaminants such as sludge, water, and particulates from fuel storage tanks (25 - 75 GPM flow rate)
- Portable system design for easy transportation
- Compressed Air Powered Pump
- Multi-Stage filtration process with fine filter bypass
- Prevents unnecessary mess, catching potential drips or spills produced during routine filter changes with the skid's drip tray
Product Details
Product Specifications
Technical Documents
Troubleshooting
The MTC HC-50 is a high capacity mobile fuel polishing system that removes water, sludge, sediment, and other contaminants that accumulate in fuel storage tanks. The system’s skid-based design allows for maximum portability and ease of transportation from tank to tank with 4 swivel wheels. The MTC HC-50 also features an air powered pump and a multi-phase fuel polishing process that allow users to remove water and large particulate before utilizing fine filtration elements. With an adjustable flow rate range of 25 to 75 GPM, the MTC HC-50 can polish up to 36,000 gallons (136,275 liters) of fuel in a runtime of 8-hours.
System Features:
Multi-Stage Filtration
Remediate fuel to desired cleanliness level with a multi-stage filtration process
Fine Filter Bypass
Spare fine filters during heavy contaminant removal
Portable System Design
Easily transport system from tank to tank with the system's skid-based construction
Drip tray
Capture potential drips or spills produced during routine filter changes
Nominal Flow Rate
25 - 75 GPM (94.6 - 283.9 LPM)
Primary Filter
Bag Filter Vessel, Liner Basket for use with 1 - 800μ Filter Bags
Water Separator
FP-90 Mechanical Water Separator
Secondary Filters
Cartridge Filter Vessel, 2 - 30μ Particulate, 10-30μ Water Block, or 3-10μ Micro-glass Filters
Fuel Conditioner
LG-X 4000 Inline Magnetic Conditioner
Pump
Air-Driven Double-Diaphragm Pump
System Controller
SFC50 Smart Filtration Controller with Safety and Alarm Features
Power
Air Powered (25 -50 SCFM @ 90psi)
Plumbing
Black Iron
Ports
2" Cam & Groove In, 2" Cam & Groove Out
Dimensions
≈ 59” x 36” x 45” (150 x 91 x 114 cm) (H x W x D)
Weight
≈ 630 lbs (286 kg)
Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).
The MTC HC-50 is a high capacity mobile fuel polishing system that removes water, sludge, sediment, and other contaminants that accumulate in fuel storage tanks. The system’s skid-based design allows for maximum portability and ease of transportation from tank to tank with 4 swivel wheels. The MTC HC-50 also features an air powered pump and a multi-phase fuel polishing process that allow users to remove water and large particulate before utilizing fine filtration elements. With an adjustable flow rate range of 25 to 75 GPM, the MTC HC-50 can polish up to 36,000 gallons (136,275 liters) of fuel in a runtime of 8-hours.
System Features:
Multi-Stage Filtration
Remediate fuel to desired cleanliness level with a multi-stage filtration process
Fine Filter Bypass
Spare fine filters during heavy contaminant removal
Portable System Design
Easily transport system from tank to tank with the system's skid-based construction
Drip tray
Capture potential drips or spills produced during routine filter changes
Nominal Flow Rate
25 - 75 GPM (94.6 - 283.9 LPM)
Primary Filter
Bag Filter Vessel, Liner Basket for use with 1 - 800μ Filter Bags
Water Separator
FP-90 Mechanical Water Separator
Secondary Filters
Cartridge Filter Vessel, 2 - 30μ Particulate, 10-30μ Water Block, or 3-10μ Micro-glass Filters
Fuel Conditioner
LG-X 4000 Inline Magnetic Conditioner
Pump
Air-Driven Double-Diaphragm Pump
System Controller
SFC50 Smart Filtration Controller with Safety and Alarm Features
Power
Air Powered (25 -50 SCFM @ 90psi)
Plumbing
Black Iron
Ports
2" Cam & Groove In, 2" Cam & Groove Out
Dimensions
≈ 59” x 36” x 45” (150 x 91 x 114 cm) (H x W x D)
Weight
≈ 630 lbs (286 kg)
Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).
MTC HC-50 Price Request
Enter your name, email, and location and the proper AXI representative will reach out shortly.
Engineering Services
Products
Resource Center
Information
All company names, logos, and brands are property of their respective owners. Use of these names, logos, and brands does not imply endorsement.
Copyright © 2024 AXI International | All Rights Reserved.
Copyright © 2024 AXI International | All Rights Reserved.