FP-40 WATER SEPARATOR

FP-40 WATER SEPARATOR

Water separator system for removing water contamination from a fuel tank.

FP-40 WATER SEPARATOR

 AXI’s Water Separators remove the free water in fuel by allowing the heavier fluid (water) fall to the bottom of the unit, while the lighter fuel is passed on into the fuel system.

How Do Water Separators Work?

The origin of the majority of fuel related problems can be traced back to the introduction of water into a fuel system.  By removing the water from fuel, the opportunity for microbial growth and other contamination is greatly reduced.  AXI’s water separators remove the free water in fuel by allowing the heavier fluid (water) fall to the bottom of the unit, while the lighter fuel is passed on into the fuel system.

Managing Multiple Systems or Large Facilities?

Check out AXI’s line of Fuel Transfer Systems, Day Tanks, and Master Control Panels that tie your systems all together — or click on the button to have one of our Engineers assist you in building a system for your specific needs.

  • Nominal Flow

    39.6 GPM/150 LPM

  • HP Guide

    4000 HP

  • IN/OUT Ports

    1″ BSP

  • Top Port

    1″ Bleed Valve

  • Drain Valve Bottom Port

    1″ Lockable Ball Valve

  • Width

    7.2 in/183 mm

  • Length

    20.9 in/530 mm

  • Bracket

    Fixed to MFP

  • Empty Weight

    ≈ 20.88 lbs/9.47 kg

  • Caution

    Not for use with fluids that have a flash point below 100°F

DESCRIPTION

How Do Water Separators Work?

The origin of the majority of fuel related problems can be traced back to the introduction of water into a fuel system.  By removing the water from fuel, the opportunity for microbial growth and other contamination is greatly reduced.  AXI’s water separators remove the free water in fuel by allowing the heavier fluid (water) fall to the bottom of the unit, while the lighter fuel is passed on into the fuel system.

Managing Multiple Systems or Large Facilities?

Check out AXI’s line of Fuel Transfer Systems, Day Tanks, and Master Control Panels that tie your systems all together — or click on the button to have one of our Engineers assist you in building a system for your specific needs.

SPECIFICATIONS
  • Nominal Flow

    39.6 GPM/150 LPM

  • HP Guide

    4000 HP

  • IN/OUT Ports

    1″ BSP

  • Top Port

    1″ Bleed Valve

  • Drain Valve Bottom Port

    1″ Lockable Ball Valve

  • Width

    7.2 in/183 mm

  • Length

    20.9 in/530 mm

  • Bracket

    Fixed to MFP

  • Empty Weight

    ≈ 20.88 lbs/9.47 kg

  • Caution

    Not for use with fluids that have a flash point below 100°F

Related Products