FP-90 WATER SEPARATOR

FP-90 WATER SEPARATOR

Water separator for use in bulk fuel tanks and systems to remove water contaminants.

FP-90 WATER SEPARATOR

 AXI’s Water Separators remove the free water in fuel by allowing the heavier fluid (water) fall to the bottom of the unit, while the lighter fuel is passed on into the fuel system.

Removing Water From Fuel

The origin of the majority of fuel related problems can be traced back to the introduction of water into a fuel system.  By removing the water from fuel, the opportunity for microbial growth and other contamination is greatly reduced.  AXI’s water separators remove the free water in fuel by allowing the heavier fluid (water) fall to the bottom of the unit, while the lighter fuel is passed on into the fuel system.

Managing Multiple Systems or Large Facilities?

Check out AXI’s line of Fuel Transfer Systems, Day Tanks, and Master Control Panels that tie your systems all together — or click on the button to have one of our Engineers assist you in building a system for your specific needs.

  • Nominal Flow

    90 GPM/340 LPM

  • HP Guide

    N/A

  • IN/OUT Ports

    2″ BSP

  • Top Port

    1″ Bleed Valve

  • Drain Valve Bottom Port

    1″ Lockable Ball Valve

  • Width

    7.2 in/183 mm

  • Length

    37.8 in/960 mm

  • Bracket

    Fixed to MFP

  • Empty Weight

    ≈ 29.21 lbs/13.25 kg

  • Caution

    Not for use with fluids that have a flash point below 100°F

DESCRIPTION

Removing Water From Fuel

The origin of the majority of fuel related problems can be traced back to the introduction of water into a fuel system.  By removing the water from fuel, the opportunity for microbial growth and other contamination is greatly reduced.  AXI’s water separators remove the free water in fuel by allowing the heavier fluid (water) fall to the bottom of the unit, while the lighter fuel is passed on into the fuel system.

Managing Multiple Systems or Large Facilities?

Check out AXI’s line of Fuel Transfer Systems, Day Tanks, and Master Control Panels that tie your systems all together — or click on the button to have one of our Engineers assist you in building a system for your specific needs.

SPECIFICATIONS
  • Nominal Flow

    90 GPM/340 LPM

  • HP Guide

    N/A

  • IN/OUT Ports

    2″ BSP

  • Top Port

    1″ Bleed Valve

  • Drain Valve Bottom Port

    1″ Lockable Ball Valve

  • Width

    7.2 in/183 mm

  • Length

    37.8 in/960 mm

  • Bracket

    Fixed to MFP

  • Empty Weight

    ≈ 29.21 lbs/13.25 kg

  • Caution

    Not for use with fluids that have a flash point below 100°F

Related Products